Technomatic 458 A
Ironing press especially suitable for checking the size variations of the fabric with steam treatment.
Pneumatic press with 2 push buttons controlled press head, upper buck safety device.
Boiler capacity 23 Lt, built-in water pump and vacuum exhauster, steam-heated bucks, steaming from upper and lower bucks, vacuum from lower buck only.
The connection to a compressed air source is necessary for correct operation.
Steam pressure and temperature monitoring.
Upper buck descent control with buttons and safety frame.
Possibility to adjust the closing distance between the two bucks.
Wide possibility of programming the phases of use of the press:
– steaming cycle on the upper and lower bucks
– vacuum cycle on the lower buck
– upper buck closing cycle
Other power voltage available on request
|Boiler capacity||23 Lt|
|Boiler heating element||18 kW|
|Water pump||0.70 Hp – 0.50 kW|
|Vacuum exhauster||0.50 Hp – 0.375 kW|
|Steam pressure||5.5 bar|
|Air pressure||7 bar|
|Overall dimensions||1410x1300x1200H mm|