skip to Main Content

Rotor Cabinet 100 A

Camptel line


Forced vaporization cabin
Steam Operating Temperature: 150 °C
Time-controlled work cycle in all phases.

Built-in steam generator:
– 23 Lt capacity boiler and 12 kW heating element with fully automatic operation, with water feed pump, electronic level control, safety valve and conveyed discharge.
Silent and powerful ventilator included.

WORKING CYCLE: it takes place without the slightest dispersion of steam, allowing energy savings and a better working environment.
Start of the cycle after closure of the door.
Forced vaporization by inserting, during the steaming cycle, a jet of hot air that favours the complete distribution of the steam even in the less accessible areas.
Vaporization is carried out by means of a pneumatic valve.
For correct operation, the connection to a compressed air source is necessary.




Other power voltage available on request

Power Voltage V400/ph3+N+T/50hz
Boiler capacity 23 Lt
Boiler heating element 12 kW
Blowing motor 1 Hp – 0.75 kW
Water pump 0.70 Hp – 0.50 kW
Working pressure 5 bar
Compressed air pressure 6 bar
Compressed air consumption 6 Lt/H
Overall dimensions 1060x1325x2000H mm
Weight 250 Kg

Additional information


– Standard/Plus mannequin
– Standard/Plus bag
– Vertical clamps
– Curved clamp
– Wooden sleeve stretchers
– Silicon sleeve stretchers
– Pneumatic/Hand operated waist stretcher
– Leg stretcher device with base support
– Straight clamps
– 15 kW or 18 kW heating element
– Twin set, separately controlled heating elements for energy saving
– 1,5 HP – 1,125 kW upgraded ventilator
– Pneumatic valve for air/steam recycle and exhaust
– Multiple device for 5 hangers for simultaneous ironing of 5 garments
– External side support for mannequin
– Additional holding frame for accessories


Finishing and sanitation cabin


Built-in Boiler

Rotor Cabinet 100 A

    Your name*
    Your Email*
    Presto il consenso al trattamento dei dati ai sensi dell’Informativa

    Back To Top