Technomatic 451 A
Pneumatic press with 2 push buttons controlled press head, upper buck safety device.
Boiler capacity 23 Lt, built-in water pump and vacuum exhauster, steam-heated bucks, steaming from upper and lower bucks, vacuum from lower buck only.
The connection to a compressed air source is necessary for correct operation.
The TECHNOMATIC series of presses, characterised by the wide range of models available, has been designed to meet the most modern requirements for use in laundries, ironing plants and the garment industry.
The differentiation is developed on the basis of the assumption to fully satisfy all the technical specifications of ironing used in every part of the world.
Presses with manual or pneumatic operation, with or without boiler, up to 6 different buck shapes, electronic devices for control of the ironing cycles, possibility of adjusting the pressure of the bucks, are some of the distinguishing features of the CAMPTEL presses, whose main objective is the quality of the ironing operation, together with the speed and ease of use of the equipment.
Metal structure oven-painted with anti-scratch epoxy powder.
The entire TECHNOMATIC series has been designed to guarantee maximum operating capacity, durability and less effort for the operator, together with a high level of ironing faithful to the most modern principles of Italian design.
[Boiler]+[Vacuum and Steaming, Heated Lower Buck (Steam Chamber)]+[Steaming, Heated Upper Buck (Steam Chamber)]
Other power voltage on request
|Power voltage||V230/ph3/50-60 Hz
|Boiler capacity||23 Lt|
|Boiler heating element||12-15-18 kW|
|Water pump||0.70 Hp – 0.50 kW|
|Vacuum exhauster||0.50 Hp – 0.37 kW|
|Steam pressure||5 bar|
|Air pressure||7 bar|
|Buck height||1020 mm|
|Overall dimensions||1410x1300x1200h mm|
– Utility "01A" (220x1190x360 mm)
Other buck shapes on request
– Additional pedal for vacuum action on the lower buck pointed end (shapes 01A – 03 – 025 only)
Dry cleaning and laundry press