PBM/P07
Camptel Line
PNEUMATIC BAGGING MACHINE
Pneumatic bagging machine suitable for wall mounting.
Suitable for wall mounting with roll holder above or below, or with its own metal support complete with roll holder on the ground.
2 push buttons safety closing.
Suitable for rolls up to 600 mm width and up to 100 µm thick.
Diagonal cold welding by pneumatic cylinders and timer for preselection of welding time.
350 W heating element with galvanized iron support.
The metal structure is oven-painted with anti-scratch epoxy powder.
To be connected to main compressed air source.
Electrical connections: V220/ph1/50hz
Heating element: 350W
Air pressure: 6 bar
Working pressure: 2 bar
Additional information
Accessori | Accessri a richiesta simb. 601 porta rotoli a pavimento per applicazione imbusttrice a muro |
---|---|
Category | Bagging machine |