Rotor Cabinet 101 A
SOCKS/TIGHTS IRONING CABINET
Steam cabin for quick ironing of socks and tights.
Built-in steam generator:
– 23 Lt capacity boiler and 12 kW heating element with fully automatic operation, with water feed pump, electronic level control, safety valve and conveyed discharge.
Silent and powerful ventilator included.
Predisposition for simultaneous ironing of:
– 24, 36 or 48 socks;
– 24 or 36 tights.
The finishing operation takes place without the slightest dispersion of steam, allowing energy savings and a better working environment.
Start of the cycle after closure of the door.
Forced vaporization by inserting, during the steaming cycle, a jet of hot air that favours the complete distribution of the steam even in the less accessible areas.
The ironing phases are programmable by means of an electronic card with digital controls.
Vaporization is carried out by means of a pneumatic valve.
For correct operation, the connection to a compressed air source is necessary.
Other power voltage available on request
|Boiler capacity||23 Lt|
|Boiler heating element||12 kW|
|Blowing motor||1,5 Hp – 1.125 kW|
|Water pump||0.70 Hp – 0.50 kW|
|Working pressure||5 bar|
|Compressed air pressure||6 bar|
|Compressed air consumption||6 Lt/H|
|Overall dimensions||1060x1325x2000H mm|
24 Socks – Double 12-holes crown, Ø 12 mm, with 24 forms